go home
goto deutsche SeiteFacebooktwitter go home go products go contact go support
Agora IP S
Doortel 4
Doortello Smart
New for the download
Doortello Smart quick user guide
PDF Doortello Smart
Quick user guide 1.03
1,0 MB
Doortello Smart Bedienungsanleitung
PDF Doortello Smart AGL
Installation 1.00
1,0 MB

Door phone with analogue telephone line interface

Doortello Smart AGL
  • Up to 4 door chime buttons
  • Remote programming
  • Two driver contacts

The DOORTELLO SMART is a doorstation which can be connected to a normal analogue telephone line of any PABX. Pressing the door chime button the unit will size the line and dial a programmed telephone number. Up to four telephone number with 4 digits can be programmed using DIP switches or a 16 digits number using DTMF programming. Using a DTMF tone uo to two door opener contacts can be activated during the conversation.

The line release is ensured by a busy tone detection and a selectable hardware timer.

Doortello Smart DB

Doortello Smart DT


DB version for the behind panel installation with steel case DT version for the flexible foreign installation

Standard features

  • Up to fourtelephone number with up to 4 digits (DIP) or 16 diigits (DTMF programming) can be programmed (1 - 0, *, #, Pause, Flash)
  • Automatic call answer function
  • Highend handsfree device
  • Busy tone, ring back tone detection
  • Programming for loudspeaker and microphone volume
  • Loudspeaker volume can be changed during conversation
  • Two door opener contact activated by DTMF tone
  • Manual line release by DTMF tone
  • Automatic line release after door opening (selectable)
  • Connection to a standard analogue telephone line, two wires
  • Hardware disconnect timer selectable
  • Programmable activation time for driver contacts
  • Second driver contact with manual or automatic (camera function) function
  • Name labels illumination

Technical data

  • Power consumption: min. 20 mA, telephone line powered (min. 24 Vdc max 60 Vdc)
  • Stand by power consumption: 4 µA
  • Environmenl: - 20° bis + 50° C, 90% Humidity (not condensing)
  • Max. door opener contact load: 30 Vpp, 1 A
  • Dimensions (AGL version): 100 x 210 x 30 mm (b x h x t)
  • Dimensions (DB version): 100 x 92 x 25 mm (b x h x t)
  • Dimensions (DT version): 82 x 76 x 20 mm (b x h x t)
  • Type approvals: CE, WEEE, ROHS
  Home | Products | Contact | Support | Impressum
to the top
  © Copyright Rocom Energie- und Kommunikationssysteme GmbH 2018 - 2020. All rights reserved.