Peripherals
and expansion units for the lift emergency call system |
|
|
|
- DC/DC
converter 12/24 Vin/4,3 Vout with pictogram driver,
for the supply of one ECII emergency call unit with parallel
connection on the same telephone line (up to 9 units) and intergrated
pictogram driver. Compatible with all ECII.
|
|
|
|
- ECII
UPS 12 Vdc emergency power supply unit, for the supply
of one ECII emergency call unit with parallel connection on
the same telephone line (up to 6 units), additional 12 Vdc output
with battery backup for external units (like pictograms, alarm
sound device, etc.), 12 Vdc output to supply an emergency light.
1 h back up time (at nominal load). Automatic weekly battery
test with battery failure alarm sending using the ECII unit.
Compatible with all ECII
- UPS
cable, for the connection of a UPS emergency power
supply unit to an ECII emergency call system unit with battery
failure alarm sending.
- Battery
2Ah, sealed battery 12 V 2 Ah for the ECII UPS emergency
power supply unit. Can be also used for ECII GSM and ECII SE
GSM.
|
|
|
|
- Helpy
UPS 12 Vdc emergency power supply unit, for the supply
of one Helpy emergency call unit. 1 h back up time (at nominal
load). Automatic weekly battery test with battery failure alarm
sending using the Helpy unit.
- Helpy
UPS Kabel, for the connection of a UPS emergency power
supply unit to an Helpy emergency call system unit with battery
failure alarm sending.
- Batterie
1,3Ah, sealed battery 12 V 1,3Ah for the Helpy UPS
emergency power supply unit.
|
|
|
|
- Supplementary
alarm button. One n/o contact. Heavy duty plastic casing
for the installation on the top and the bottom of the lift cabin.
Kit with two units.
|
|
|
|
- Protection
grid. Protection grid for the ECII FLEX and Helpy 2W-V.
To protect microphone and loudspeaker against damage from outside.
|
|
|
|
- Magnet
with keyholder. To activate the ECII FLEX GSM REED contact.
|
|
|
|
- Speaker
unit. Speaker phone unit to expand the ECII FLEX with
a speech device above and below the lift cabin. Mit alarm button,
microphone and loudspeaker.
|
|
|
|
- Active
satellite BG. Active speaker phone unit for Helpy GSM
for behind panel installation. Without LEDs.
- Passive
satellite BG. Passive speaker phone unti for Helpy
GSM and Helpy 2W for behind panel installation. Without LEDs.
- 2W
active satellite BG. Active speaker phone unit for
Helpy 2W for 2 wire bus system for behind panel installation.
With or without LEDs.
|
|
|
|
- Active
satellite NT. Active speaker phone unit for Helpy GSM
for installatiopn on top/bottom cabin or in the pit. With alarm
button Without LEDs.
- Passive
satellite NT. Passive speaker phone unti for Helpy
GSM and Helpy 2W for installatiopn on top/bottom cabin. With
alarm button. Without LEDs.
- 2W
active satellite NTn. Active speaker phone unit for
Helpy 2W for 2 wire bus system for installatiopn on top/bottom
cabin or in the pit. With alarm button. With LEDs.
|
|
|
|
- Active
satellite ALBU. Active speaker phone unit for Helpy
GSM for wall mounted installation (cabin or pit). With LEDs
and alarm button.
- 2W
active satellite ALBU. Active speaker phone unit for
Helpy 2W for 2 wire bus system for wall mounted installation
(cabin, pit or floor). With LEDs. With or without alarm button.
|
|
|
|
- Active
satellite ES. Active speaker phone unit for Helpy GSM
for flush mounted installation. With LEDs and alarm button.
- 2W
active satellite ES. Active speaker phone unit for
Helpy 2W for 2 wire bus system for flush mounted installation
(cabin or floor). With LEDs. With or without alarm button.
|
|
|
|
- 2W
active satellite GRUBE. Active speaker phone unit for
Helpy 2W for 2 wire bus system for wall mounted installation
in the pit. Without LEDs. With alarm button.
|
|
|
|
- ORONA
cable kit. For the intergartion of Helpy GSM and Helpy
2W-TL emegency phone systems with ORONA controller.
|
|
|
|
- Speech
unit WP. Speakerphone unit to expand the ECII FLEX
with a speech device above and below the lift cabin. With alarm
button, microphone and loudspeaker. For outdoor installations.
More informations
- 2W
active satellite WP. Speakerphone unit to expand theHelpy
2W with a speech device above and below the lift cabin. With
alarm button, microphone and loudspeaker. For outdoor installations.
|
|
|
|
- CAT
5 cable. For the connection of the ECII FLEX and ECII
GSM speech units. 5 or 10 m lenght.
|
|
|
|
- Loop
antenna kit, for hearing aid compatible EN 81:70 lifts.
Power supply 12 Vdc. With amplifier and antenna.
|
|
|
|
- Loop
antenna kit, for hearing aid compatible
EN 81:70 lifts. Power supply 9 to 28 Vdc. With amplifier and
antenna.
|
|
|
|
- Loop
antenna amplifier with integrated antenna, for the
connection of a inductive loop antenna to the lift emergency
phones 9 to 28 Vdc.
|
|
|
|
- Loop
antenna tester. Tester for the measurement of a loop
antenna induction field.
|
|
|
|
- Intercom
unit, for the use with all ECII Flex. Enables a intercom
call between a machine room and one lift cabin or a pit unit..
Also the connection of a phone to handle a mutliple connection
of up to 6 lift cabins is possible. 12 to 24 Vdc power supply.
More informations
|
|
|
|
- Machine
room phone, for the use with the intercom unit as machine
room or pit phone.
|
|
|
|
- Pit
Unit , for the connection to the intercom unit as pit
or cabin roof telephone. Can be also connected parallel to a
ECII without the intercom unit.
|
|
|
|
- ECII
GSM Gateway, for the connection of ECII to the GSM
network. Up to 9 ECII FLEX or Helpy lift emergency call units
can be connected to one adapter. 10 to 28 Vdc power supply.
With 230 Vac psu. Integrated NiMH battery for power failure
backup. More informations
|
|
|
|
- GSM200-C,
for the connection of Helpy 2W-TL and Helpy 2W-LCP to the GSM
network. No power supply required.
|
|
|
|
- GSM500.GC,
for the connection of ECII or Helpy to the GSM network. Up to
9 ECII FLEX or Helpy lift emergency call units can be connected
to one adapter. 10 to 17 Vdc power supply. With 230 Vac psu.
Integrated NiMH battery for power failure backup. More
informations
|
|
|
|
- GSM500.VND,
for the connection of ECII or Helpy to the GSM network. Up to
9 ECII FLEX or Helpy lift emergency call units can be connected
to one adapter. With serial data interface for the connection
of a lift controller with RS232, RS485 and CANBus interface.
Transparent to CANopen LIFT. State-of-the-art data call setup
over the internet not requiring any specific hardware on th
receiver side. 10 to 17 Vdc power supply. With 230 Vac psu.
Integrated NiMH battery for power failure backup. More
informations
|
|
|
|
- GSM500.3G,
for the connection of ECII or Helpy to the UMTS/GSM network.
Up to 9 ECII FLEX or Helpy lift emergency call units can be
connected to one adapter. With serial data interface for the
connection of a lift controller with RS232, RS485 and CANBus
interface. Transparent to CANopen LIFT. State-of-the-art data
call setup over the internet not requiring any specific hardware
on th receiver side. 10 to 17 Vdc power supply. With 230 Vac
psu. Integrated NiMH battery for power failure backup. More
informations
|
|
|
|
- GSM500.4G,
for the connection of ECII or Helpy to the LTE/UMTS/GSM network.
Up to 9 ECII FLEX or Helpy lift emergency call units can be
connected to one adapter. With serial data interface for the
connection of a lift controller with RS232, RS485 and CANBus
interface. Transparent to CANopen LIFT. State-of-the-art data
call setup over the internet not requiring any specific hardware
on th receiver side. 10 to 17 Vdc power supply. With 230 Vac
psu. Integrated NiMH battery for power failure backup. More
informations
|
|
|
|
- 4G.Router,
for the connection of ECII or Helpy to the LTE/UMTS/GSM network.
Up to 9 ECII FLEX or Helpy lift emergency call units can be
connected to one adapter. With serial data interface for the
connection of a lift controller with RS232, RS485 and CANBus
interface. Transparent to CANopen LIFT. State-of-the-art data
call setup over the internet not requiring any specific hardware
on th receiver side. WLAN access point and LAN interface. Routing
functions. VPN support. 10 to 17 Vdc power supply. With 230
Vac psu. Integrated NiMH battery for power failure backup. More
informations
|
|
|
|
- GSM500.TEXT.
Special GSM gateway for sending and receiving
SMS messages. Together with the free software e-text it is possibile
to send and receive SMS messages on the PC. To realise easy
to manage and protocol SMS technical alarms form Helpy emergency
phones or GSM500 gateway. It is also possible to send the SMS
to more reciever at the same time, i.e. to start automatically
a FW upgrade on all the installed base at one time.
|
|
|
|
- ECII
Lift-SAFE, Liftguard sysetm for ECII FLEX and EC II
SE GSM. For the automatic control of the cabin emergency lights,
floor level allignement, door closing. Trip counter. Emergency
call filtering function. Automatic lift deactivation. Alarm
trasmission using the ECII FLEX and/or ECII SE GSM emergency
call system. Alarm details transmission using modem (ECII FLEX)
or SMS (ECII SE GSM). Power supply 12/24 Vdc.
|
|
|
|
- ECII
USB Adapter. USB cable adapter for the direct connection
of the ECII FLEX to a PC. For programming, monitoring, testing
and software upgrades.
|
|
|
|
- Helpy
USB Adapter. USB cable adapter for the direct connection
of Helpy emergency phones and GSM500 gateways to a PC. For programming,
monitoring, testing and software upgrades.
|
|
|
|
- ECII
Filter Kit. The Filter Kit filters out false alarms,
such as when the elevator is moving or at standstill at floor
level with open doors.
|