GSM gateway with one FXS telephone line interface and battery backup

• For GSM networks at 850, 900, 1800 MHZ and 1900 MHZ
• One analogue telephone line interface for FXS terminals
• Integrated battery backup

With the ECII GSM gateway it is possible to connect our doorstation and emergency call systems directly to the GSM network to realize cost effective routings and door speaker systems with hounderts of users using the mobile public network. Together with the emergency call system many different applications can be planed, like the installation of mobile solutions on construction sites or where the standard telephone network is not available. Also inside high buildings where the installation of this device in the machine room near the roof might be cheaper then running cables up from the basement. Up to 9 ECII FLEX emergency call system units can be connected to one ECII GSM gateway.

No programming is need at all for the installation. A mini SIM card with the PIN code 1234 is enough. The unit will delete this PIN and change it with a random generated one blocking this way the abuse of the card. But alos SIM card without a PIN code can be used.

The ECII GSM gateway adapter is delivered with a quad band GSM antenna and a PSU. It is powered with a 230 Vac mains, or using a 10 to 28 Vdc voltage. An emergency power supply with battery backup is integrated in the unit. The battery is tested periodically and an alarm is send using the ECII FLEX or an SMS if the battery fails the test.

Standard features

• GSM quad band 850, 900, 1800 und 1900 MHz gateway
• Protected slot for mini SIM card
• Quad band antenna
• SMA antenna connector
• DTMF dial in
• Ring back and busy tone generator
• Emergency power supply with battery backup
• Battery failure alarm using ECII FLEX or SMS
• Automatic SIM card blocking using a random generated PIN code
• USB connector for programming

Technical data

• 10 to 28 Vdc power supply, 230 Vac with PSU
• Stand-by consumption: 75 to 140 mA
• Consumption: 225 to 450 mA
• Loop voltage: 48 Vdc
• Battery: NiMH 4,8 V 1250 mAh
• Ringing current voltage: 40 Vpp (25 Hz)
• Tonegenerator: 425 Hz -10 dBm
• Connectors: telephone line: RJ 11, antenna: SMA, power supply: jack 5,5 mm, USB: mini USB 2.0
• Enviromental: +5° to +50°C working temperature, 30 to 90% humidity, not condensing
• Weight: 560 g (with battery and antenna)
• Dimensions: 165 x 140 x 64 mm
• Protection degree: IP20